TIO-1 32 Input Encoder Position Capturing Coprocessor

TIO-1
32 Input Encoder Position Capturing Coprocessor

The TIO-1 is a high speed, quadrature encoder position capturing, 32 channel digital input module. Whenever any of the 32 inputs changes state, the current state of all the inputs, along with the current encoder position are latched. The sample rate is faster than 2 µ-seconds, and the board has a hardware FIFO capable of latching 512 sets of samples. The on-board C programmable processor reads the data from the hardware FIFO. It can then do numeric processing on the data, and pass the results of the calculation through either ethernet or a RS232C port, to a PC or PLC.

Features

Quadrature encoder inputs (5 volt differential A+/A-/B+/B-)

Buffered encoder outputs (5 volt differential A+/A-/B+/B-)

Encoder speeds up to 5 Million counts per second

32 channels of 24VDC inputs with 2 µS response time (Opto Isolated)

24 Bit quadrature position register

Hardware FIFO with enough depth for 512 samples. (special order up to 8,192 sets of samples)

C programmable co-processor for unloading FIFO and processing data

Communications over ethernet or RS232C to PLCs

Socket communications over ethernet to a host PC

RS232C port

Ethernet I/O

Battery backed non-volitile memory

HTTP web server can be implemented on co-processor

Communicate with web browser java applet through a socket

Encoder may be substituted with an internal time base, for high-speed, time-stamped applications

Click on the image for a magnified view

Terminal Block J1
Terminals are listed left to right in the orientation of the picture.
Power connector is on the side by itself, listed top to bottom.
All terminals are labeled on the silk screen.

Connector
Terminal Signal Purpose

J1 Lower Lower Terminal Block

1 IN1 Captured input 1

2 IN2 Captured input 2

3 IN3 Captured input 3

4 IN4 Captured input 4

5 IN5 Captured input 5

6 IN6 Captured input 6

7 IN7 Captured input 7

8 IN8 Captured input 8

9 IN9 Captured input 9

10 IN10 Captured input 10

11 IN11 Captured input 11

12 IN12 Captured input 12

13 IN13 Captured input 13

14 IN14 Captured input 14

15 IN15 Captured input 15

16 IN16 Captured input 16

17 EIN-A+ Encoder input phase A positive

18 EIN-A- Encoder input phase A negative

19 EIN-B+ Encoder input phase B positive

20 EIN-B- Encoder input phase B negative

21 E+5 Encoder 5 volt supply

22 EGND Encoder power common

23 EOUT-A+ Buffered encoder output phase A positive

24 EOUT-A- Buffered encoder output phase A negative

25 EOUT-B+ Buffered encoder output phase B positive

26 EOUT-B- Buffered encoder output phase B negative

27 DTR RS232C data terminal ready

28 CD RS232C carrier detect

29 RX RS232C recieve data

30 TX RS232C transmit data

31 GND RS232C ground

Connector Terminal	Signal	Purpose
J1	Lower	Lower Terminal Block
1	IN1	Captured input 1
2	IN2	Captured input 2
3	IN3	Captured input 3
4	IN4	Captured input 4
5	IN5	Captured input 5
6	IN6	Captured input 6
7	IN7	Captured input 7
8	IN8	Captured input 8
9	IN9	Captured input 9
10	IN10	Captured input 10
11	IN11	Captured input 11
12	IN12	Captured input 12
13	IN13	Captured input 13
14	IN14	Captured input 14
15	IN15	Captured input 15
16	IN16	Captured input 16
17	EIN-A+	Encoder input phase A positive
18	EIN-A-	Encoder input phase A negative
19	EIN-B+	Encoder input phase B positive
20	EIN-B-	Encoder input phase B negative
21	E+5	Encoder 5 volt supply
22	EGND	Encoder power common
23	EOUT-A+	Buffered encoder output phase A positive
24	EOUT-A-	Buffered encoder output phase A negative
25	EOUT-B+	Buffered encoder output phase B positive
26	EOUT-B-	Buffered encoder output phase B negative
27	DTR	RS232C data terminal ready
28	CD	RS232C carrier detect
29	RX	RS232C recieve data
30	TX	RS232C transmit data
31	GND	RS232C ground

Terminal Block J2
Terminals are listed left to right in the orientation of the picture.
Power connector is on the side by itself, listed top to bottom.
All terminals are labeled on the silk screen.

Connector
Terminal Signal Purpose

J2 Upper Upper Terminal Block

1 IN17 Captured input 17

2 IN18 Captured input 18

3 IN19 Captured input 19

4 IN20 Captured input 20

5 IN21 Captured input 21

6 IN22 Captured input 22

7 IN23 Captured input 23

8 IN24 Captured input 24

9 IN25 Captured input 25

10 IN26 Captured input 26

11 IN27 Captured input 27

12 IN28 Captured input 28

13 IN29 Captured input 29

14 IN30 Captured input 30

15 IN31 Captured input 31

16 IN32 Captured input 32

17 ICOM Captured Inputs Common

Terminal Block J3

Connector
Terminal Signal Purpose

J3 Power Power Terminal Block

1 +5 5 Volt Logic Power Supply

2 GND Logic Power Common

Connector Terminal	Signal	Purpose
J2	Upper	Upper Terminal Block
1	IN17	Captured input 17
2	IN18	Captured input 18
3	IN19	Captured input 19
4	IN20	Captured input 20
5	IN21	Captured input 21
6	IN22	Captured input 22
7	IN23	Captured input 23
8	IN24	Captured input 24
9	IN25	Captured input 25
10	IN26	Captured input 26
11	IN27	Captured input 27
12	IN28	Captured input 28
13	IN29	Captured input 29
14	IN30	Captured input 30
15	IN31	Captured input 31
16	IN32	Captured input 32
17	ICOM	Captured Inputs Common

Connector Terminal	Signal	Purpose
J3	Power	Power Terminal Block
1	+5	5 Volt Logic Power Supply
2	GND	Logic Power Common

Ordering
Price: $799.00
Questions or Custom Orders

to Beidelman Software Home - TIO-1 - ENCISO - DAXD-1